Multi program tuning. One module – many programs.

When you buy a DTK tuning module you get several tuning programs in the same box. The DTK is a small computer where 9 different programs are saved and you can very easily change between them by using a switch inside the unit.

0 - Original. When this program is activated the car runs as original. No need for taking the unit off the engine, just set the switch on 0 if you need it to be as original.

1 - Economy program. Program opimized for fuel saving. Gives just a slight increase in effect.

2 - Effect program. Gives in average about 12% increase of effect.

3 - Effect program. Gives in average about 16% increase of effect.

4 - Effect program. Gives in average about 20% increase of effect. This is the standard setting when you receive the unit. You should not increase more than the unit is set for by us if not needed. However there are differences between engines and some engines must use step 5 or 6 to get the wanted increased effect. Engines can get a very high increase in effect by using step 5 and above if the increased effect comes already on step 4.    

5 - Effect program. Gives a further increase from previous step.

6 - Effect program. Gives a further increase from previous step.

7 - Effect program. Gives a further increase from previous step.

8 - Effect program. Gives a further increase from previous step.

9 - Internal program for us. Used when programming the unit.